This article was reviewed by Jason Shackelford. Jason Shackelford is the Owner of Stingray Auto Repair, a family owned and operated auto repair shop with locations in Seattle and Redmond, Washington. He has over 24 years of experience in auto repair and services, and every single technician on Jason’s team has more than 10 years of experience.
This article has been viewed 40,841 times.
Have you ever wondered why are your power windows getting damaged and malfunctioning when your car is only months old? Power windows require maintenance like a car's engine and must be lubricated in order to reduce the stress on the window regulator due to debris, sun damage, car wash residue and aging. Using the following steps will prolong the life of your window regulator and motor.You will need:-Clear Silicone Spray-Towel
Steps
-
Once the window is down and you have access to the window run. Grab your can of clear silicone spray, available at auto parts or home depot, and spray it into the window run generously. Make sure you spray it all around the run, since you want to lubricate it completely.[3]Advertisement
-
Let it stand for about 30 to 60 seconds.
-
Start rolling the window up and down two to three times to allow the window to run smoothly on the run, causing the lower run to be lubricated also.[4]
-
Repeat ever month for best result.
Community Q&A
-
QuestionWould WD-40 be fine?AndyazCommunity AnswerWD40 is used mainly for freeing rusted bolts, and what little lube in it is oil based, which will attract dust. So, it's better to stick with the article's recommendation.
-
QuestionWhat do I do if my window sticks to the top molding before it will go down? Should I lubricate the molding, and if so, what should I use?Community AnswerYou can use silicone to protect and lube the rubber seals around your car doors, which helps free up sticking glass. You might have to use Q-Tips to get in tight spaces.
Tips
-
Avoid using car wash soaps and degreaser on moldings or any rubber trim on your vehicle since it will damage it.Thanks
Expert Interview

Thanks for reading our article! If you’d like to learn more about auto maintenance and repair, check out our in-depth interview with Frank Hernandez.