Download Article
Download Article
This article was co-authored by Luigi Oppido. Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.
The wikiHow Tech Team also followed the article's instructions and verified that they work.
This article has been viewed 58,101 times.
With Remote Desktop computing, you can connect to a computer that is at work, or anywhere in the world as long as you have an internet connection. Here is the catcher. If you want to print using your local printer then you have a few steps to do in order to have the ability to print.
Steps
Download Article
-
Download the drivers for your local printer. -
Set up a printer on the Remote desktop system, using the lpt1 portAdvertisement -
Install Printer Software and choose have disk. Browse to the folder you put the drivers in. -
Once you have installed the printer on the lpt1 port, you log off. -
On your RDP icon (if you have created one), right click and edit. -
Choose the local resources tab and check printers. -
On general tab, save your settings. -
Log on, and you will then see your printers. -
Delete the one you just setup on lpt1. Set the new one as your default. Test your printer by right clicking on the printer and go to properties and print test page.
Expert Q&A
Video
Tips
-
If you want to print from a DOS application, you will need to share the printer and capture the printer:
- net use lpt1: /d
- net use lpt1: \\name of workstation on rdp\name of printer
- Example:
- net use lpt1: /d
- net use lpt1: \\myrdpwks\myprinter
Thanks
About This Article
