DIY Beaded Necklace Tutorial

Learn how to make a fun necklace at home step-by-step

Co-authored by Vanessa Stahl and Aly Rusciano

Last Updated: June 4, 2025 Fact Checked

Creating your own jewelry is a fun activity for all ages! We're here to walk you through how to create a beautiful beaded necklace with just a few materials and a bit of creativity. Let's get started.

This article is partially based on an interview with Vanessa Stahl, Jewelry Designer.

How to Make a Simple Beaded Necklace

Jewelry artist Vanessa Stahl says that to make a beaded necklace, you'll need a good set of pliers and bead stoppers. Measure your string or wire carefully to make sure you get the lengths right, and give yourself a few extra inches when cutting. Line up the beads before stringing them so you know how they'll look.

1

Gather your beading materials.

Download Article

You'll need beads and beading thread or wire. Also, get a wire cutter, crimp beads, super glue, and closures to finish your necklace properly.^{[1]
X
Research source}
- Keep in mind that the smaller the wire or thread gauge number, the thicker the wire or thread will be.^{[2]
  X
  Research source}
- Opt for a wire or thread that’ll easily pass through your chosen beads.

2

Select a length for your necklace.

Download Article

Measure your neck to find the perfect length. Take a fabric tape measure and loop it around your neck while looking at yourself in the mirror. Try small and big loops to see what style of necklace you prefer.^{[3]
X
Research source}
- A choker is the shortest necklace and is usually around 16 in (41 cm) in length, according to gemologist Joseph R. Villarreal.^{[4]
  X
  Expert Source
  
  Joseph R. Villarreal, G.G. (GIA)
  Jeweler
  
  Expert Interview}
- A collar necklace is a little longer and goes down to about 16 in (41 cm).
- A lariat is the longest, coming in at about and over 45 in (110 cm).
- You can also make up your own style and length. These are simple suggestions to give you a rough idea.
- Note that the finished length of your beaded necklace includes the beads you've used and the length of the jewelry clasp of your choice.

3

Cut your thread or wire to size.

Download Article

For example, if you'd like to make a collar necklace, cut a total of 20 in (51 cm) of thread 16 inches plus 4 inches).^{[5]
X
Research source}

4

Arrange your beads on a beadboard or flat surface.

Download Article

Play with the beads until you find the design you like best. Try different color variations or multiple layers of string. You might want a choker that wraps around your neck a few times or just one long loop. Don’t be afraid to experiment! Try doing an alternating pattern of colored beads, like the rainbow, make a random pattern, or search Google or Pinterest for inspiration.^{[6]
X
Research source}
- A beadboard is a plastic, foam, or wood board with measurements and slots for you to lay out your beads. While using a beadboard isn’t necessary, it can help you organize and design your necklace.^{[7]
  X
  Research source}
- Place your beads in your chosen design at the 0, and measure the length of your necklace using the numbers and dashes along the sides.

5

Start your necklace with the clasp.

Download Article

String on 1 bead, then a crimping bead, and then another bead.^{[8]
X
Research source} Place one end of the clasp on after the crimping bead. You can use either a lobster claw or jump ring (clasps usually come in a set with both pieces as one goes on each end).^{[9]
X
Research source} Make a loop with the thread or wire, bringing the material back through the crimp bead. Keep the lobster claw or jump ring at the top of the loop. Use a crimping tool or chain nose pliers to smoosh the crimp bead, securing it in place.^{[10]
X
Research source}
- If using bead thread, you may wish to put a dot of super glue on either end to ensure that the beads and crimp stay on.

6

Add your necklace beads.

Download Article

Slide each bead onto the string. Thread a bead through the string one bead at a time until you run out of beads. Be sure to leave about 4 in (10 cm) of stringing material at the end.
- Some jewelry makers prefer beading their entire necklace before adding one of the ends—do what you prefer!^{[11]
  X
  Research source} Adding a lobster claw or clasp to the end of the necklace first will keep your beads on the string without a stopper.

7

Secure the final clasp section to the necklace with a crimp bead.

Download Article

String another crimping bead onto the thread or wire. Slide on the end of the clasp duo you chose (a lobster claw or jump ring), create another loop through the crimp bead, and squish the crimp bead in place.^{[12]
X
Research source}
- Be careful not to pull the stringing material too tight. Leave a small amount of slack in the necklace. This leaves room for the beads to move and rotate. If the stringing material is too tight, the necklace will be rigid, and this can make the design look angular.
- Keep in mind that a lobster claw connects to a jump ring. You can’t have one without the other.

8

Cut away any leftover string or wire.

Download Article

Use wire cutters or jewelry scissors to remove any excess wire or thread. To avoid cutting the material too close to the crimp bead, weave about 1 in (2.5 cm) of the material through the beads for extra security.^{[13]
X
Research source}
- Now, all that’s left to do is wear your DIY beaded necklace with pride!

Community Q&A

Search

Add New Question

Question

How do I learn bead making?

Community Answer

Have you tried searching YouTube for tutorials? That's a really good resource. Your local craft store may also offer classes.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 23 Helpful 74
Question

How can I make a necklace using thread but without beads?

Community Answer

Yes, you can make a necklace by braiding or knotting thread without beads.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 37 Helpful 85
Question

Can I just knot the necklace without using clamps or combos?

Community Answer

It depends on whether you use strings or wires. If you use strings, it's pretty easy to tie them, but with wire, you might need some tools.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 16 Helpful 24