How to Flare Brake Lines

Download Article

Learn how to create quality flares from home

Co-authored by Matthew Rava

Last Updated: March 2, 2025

Download Article

Generating Tool

|

Double Flaring Tool (New Standard)

|

Video

|

Q&A

|

Tips

|

Warnings

|

Things You'll Need

Flaring brake lines ensures a leak-proof connection without extra materials or sealants. If the brake lines aren't properly flared, you can lose fluid that will cause your brakes to fail. This article will explain how to flare your brake lines using single and double flares.

Steps

Download Article

Advertisement
3
Cut brake tubing to the desired length with tubing cutters or a hacksaw.^{[1]
X
Research source}
- Cutters will cut round tubing squarely without causing burrs. You will have to remove burrs if you use a hacksaw.
4
Use a flaring tool or a double flare tool to form the tubing's flare.^{[2]
X
Research source}
- The instructions for both types of single flare tools are given below.
5
Put the cone of the tool over the end of the tubing.
- Lower the cone down until it is centered over the tube's end.
Turn the advance screw to move the cone until the part of the tube being flared is firmly against the countersunk recess of the bar.
If the line is damaged at all, replace it with a new one.^{[3]
X
Expert Source

Matthew Rava
Auto Repair Expert

Expert Interview}

Part 1

Part 1 of 2:

Generating Tool

Download Article

1
Place the cone over the end of the tubing and move it down until the cone is centered.
- On a generating flare tool, the flare is formed in the air instead of in the recessed part of the bar.
Check the manual for the number of revolutions needed for the flare size you need.
If you end up with any damage, even a hairline crack, toss out the brake line and try again with a new one.^{[4]
X
Expert Source

Matthew Rava
Auto Repair Expert

Expert Interview}

Part 2

Part 2 of 2:

Double Flaring Tool (New Standard)

Download Article

1
Clamp your tubing into the flaring bar.^{[5]
X
Research source}
- Ensure the depth is equal to the edge of your tubing size insert.
2
Install the yoke and use it to advance the cone into the tube until a bell shape forms.^{[6]
X
Research source}
- Remove the insert and finish advancing the cone into the bell.
- The bell shape of the tube forms the double thickness flare.

Video

Community Q&A

Search

Add New Question

Question

Can I use a single in an application where a double flare was used?

Uglymug18

Community Answer

No. Double flare is used in high pressure ABS applications for a reason. A single flare is more likely to spit under high pressure, causing break failure.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 5

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

There are three types of flares: single flares, double flares, and bubble flares.^{[7]
X
Expert Source

Matthew Rava
Auto Repair Expert

Expert Interview}

Thanks
Helpful 1 Not Helpful 0
Practice flaring lines with some inexpensive tubing before flaring your vehicle's brake lines.

Thanks
Helpful 6 Not Helpful 3
The Society of Automotive Engineers recommends double flaring for all hydraulic brake lines.

Thanks
Helpful 1 Not Helpful 3

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Consult your tool's user guide for specific instructions. Tools' instructions can vary from manufacturer to manufacturer.

Thanks
Helpful 2 Not Helpful 2