How to Unblock a Downpipe Drain

Download Article

Co-authored by David Balkan

Last Updated: March 10, 2025 References

Download Article

Using Water Pressure

|

Snaking out a Clog

|

Tips

|

Things You'll Need

A downpipe drain is the underground pipe that runs water from gutters away from a building and usually lets out at the curb. Over time, leaves, dirt, and other debris can clog up the pipe. If your downpipe isn’t draining or water is flowing out the back, then it’s probably clogged. First, try to dislodge it by feeding a hose into the pipe and hitting the clog with a high-pressure nozzle. If that doesn’t work, insert a plumbing snake into the pipe and break the clog up manually. With either method, you should be able to unclog your pipe without any expensive fixes or replacements.

Method 1

Method 1 of 2:

Using Water Pressure

Download Article

1
Remove the downspout from the pipe. The downspout is the pipe that runs down the building from the gutter to the underground downpipe. You have to remove the spout to access the downpipe. Remove the screws at the top of the downspout connecting it to the gutter. Then unscrew the straps attaching the spout to the house. Lift the spout out of its position at the opening of the downpipe.^{[1]
X
Research source}
- Depending on how tall the downspout is, you may need a ladder to reach the top. If so, make sure the ladder is on a flat, stable surface and don't stand on the top step to maintain your balance.^{[2]
  X
  Expert Source
  
  David Balkan
  Professional Plumber & CEO of Balkan Sewer & Water Main
  
  Expert Interview}
- Remember that sometimes the downspout is clogged, not the downpipe. Look down the spout with a flashlight before removing it to see if there is a blockage in there. If so, spray down with a high-pressure hose to dislodge it.^{[3]
  X
  Expert Source
  
  David Balkan
  Professional Plumber & CEO of Balkan Sewer & Water Main
  
  Expert Interview}
2
Attach a high-pressure nozzle onto your garden hose. The hose’s normal pressure probably won’t be enough to dislodge the clog. Get a high-pressure nozzle to focus more pressure onto the blockage. Attach it to the front of your hose.^{[4]
X
Research source}
- You can buy high-pressure nozzles from the hardware store or order one online.
- Make sure the nozzle doesn’t have to be squeezed. You won’t be able to squeeze it while it’s in the pipe.
Advertisement
3
Insert the hose into the underground pipe until it stops. Begin feeding the hose into the pipe. Push until the hose stops, indicating that you’ve probably reached the blockage.^{[5]
X
Research source}
- If your hose is too short, you can get an extender. Otherwise, just start spraying the water when the hose reaches its max length.
4
Turn the water on as high as it goes. With the hose right up against the blockage, go and turn the water on. Let the hose spray and see if it dislodges the clog.^{[6]
X
Research source}
- In some cases, the clog might be loose enough for the hose to poke right through it. If this happens, try spraying some water down the pipe anyway to clear up the rest of the clog.^{[7]
  X
  Expert Source
  
  David Balkan
  Professional Plumber & CEO of Balkan Sewer & Water Main
  
  Expert Interview}
5
See if water and debris come out the other side of the pipe. Go to the spot where the pipe lets out. If water and debris are coming out, then the clog was dislodged. Leave the hose in place until only water is coming out with no debris.^{[8]
X
Expert Source

David Balkan
Professional Plumber & CEO of Balkan Sewer & Water Main

Expert Interview} This indicates that the clog is totally gone.^{[9]
X
Research source}
- Give the pipe a final test by pulling the hose out and removing the high-pressure nozzle. Then insert the hose again and turn it on low pressure. If the water comes out the other side, then the clog is gone.

Method 2

Method 2 of 2:

Snaking out a Clog

Download Article

1
Insert a handheld plumbing snake into the pipe if the hose didn’t work. If the water wasn’t strong enough to dislodge the blockage, you’ll have to remove the clog manually. A plumbing snake is a tool that plumbers use to clear drains. It has a wire string that you can lower down a drain and a spool that spins it to dislodge clogs. Get one from a hardware store and insert it into the downpipe.^{[10]
X
Research source}
- Snakes are a handy tool to keep around your home at all times because they can unclog any drain you have. If you don’t want to purchase one, hardware stores may rent them as well.
- Do not use a power snake. Underground drains are usually PVC pipes, and power snakes could break them.^{[11]
  X
  Research source}
2
Feed the snake into the pipe until it stops. Insert the tip of the snake into the pipe and feed it through by pulling more wire out of the casing. Continue until you can’t push the snake any further, indicating that you’ve found the clog.^{[12]
X
Research source}
- Standard plumbing snakes are 50 feet (15 m). This should be enough for most downpipe drains, but if yours is longer, get a larger snake.
3
Turn the handle on the snake to break up the clog. Once you hit the clog, turn the screw on the front tip of the snake to the right. This locks the snake in place. Then turn the handle on the casing to spin the wire. This breaks up the clog. Work the snake back and forth a few times while spinning to get any remaining debris.^{[13]
X
Research source}
- Leave the snake in until after you check that the clog is dislodged so you don't have to re-insert it.
4
Run water through the pipe to see if the clog came loose. Once you think you’ve broken up the clog, leave the snake in the drain and go get your hose. Spray it down into the pipe and see if water comes out the other side. If it does, then you successfully unclogged the pipe. If not, continue working the snake further to find other blockages.^{[14]
X
Research source}
- Leave the water running for a few minutes to wash away any remaining debris. Turn the hose off when only water is coming out with no debris.