PDF download Download Article
Troubleshoot and resolve TPMS warning lights with expert advice
PDF download Download Article

Ford vehicles are known for being easy to maintain and fix, but they are notorious for causing headaches every now and then when it comes to the tire pressure monitoring system. The sensors that check your tire pressure rely on separate batteries, which typically last around 7-10 years before they need to be replaced. If the TPMS light is solid, you probably just have low tire pressure. To help you navigate the process, we talked to Ed Beery, an automotive specialist, to get the info you need to fix your Ford.

What the TPMS Indicator Means

A solid tire pressure monitoring system (TPMS) light indicates that one of your tires has low pressure and needs to be filled with air. If the TPMS light is flashing, the battery for one of your tire pressure sensors is dying and needs to be replaced soon. Visit a Ford dealership to get the batteries replaced.

Section 1 of 5:

What does a flashing tire pressure light mean?

PDF download Download Article
  1. In Ford vehicles, the tire pressure sensor relies on its own battery. If your tire pressure monitoring system (TPMS) light is blinking, your vehicle is trying to let you know that the TPMS sensor battery is close to the end of its life and it needs to be replaced soon.[1]
    • How serious is a flashing TPMS light? A dying TPMS battery is no big deal. You can keep driving so long as you address the problem relatively soon.
    • How do you replace the TPMS battery? Take your vehicle to any Ford dealership. They’ll have a much easier time replacing the sensor than a typical mechanic will.
    • How much do TPMS batteries cost? A dealer should charge $50-85 per sensor battery. Each sensor has its own battery, so you’re best off replacing them all at once if you can afford it and don’t feel like going back to get each battery sensor replaced individually.[2]
    • What if the light flashes then goes solid? If the TPMS light flashes on startup then goes solid, the sensor and the battery are probably both bad. Expect to spend around $200 a tire in this case.
  2. Advertisement
Section 2 of 5:

What does a solid tire pressure light mean?

PDF download Download Article
  1. Automotive specialist and mechanic Ed Beery explains how to check your tire pressure and fill any tires that are low: “Remove the valve stem cover for the first tire and keep it in your hand to avoid losing it. Push a pressure gauge into the valve and apply pressure evenly. If the tire is low, add air until the desired pressure is reached.”[3]
    • How much air do I add to my tire? Ed Beery points out, “The recommended tire pressure is printed on the side of the tire.”[4] Typically, you need 28-36 PSI per tire.
    • Why is the light still on? If the TPMS light stays illuminated after you’ve filled the low tires, you just need to reset the TPMS light.
Section 3 of 5:

Can I drive with low tire pressure?

PDF download Download Article
  1. If your tire is basically flat and you can see the rubber sticking out where the tire sits on the ground, don’t drive. Throw your spare tire on the vehicle. If your tire is this flat, you’ve likely got a leak so drive to the mechanic or tire shop to have the tire patched and refilled.[5]
    • If you do drive on extremely low tire pressure, you risk permanently damaging your rim, axle, or chassis.
  2. If the TPMS light is on but the tire appears mostly inflated (i.e. it’s the same shape as the other tires), you’re good to drive for a short while. Take it slow and head over to the nearest gas station to fill the air in your tire.[6]
    • Don’t ignore low tire pressure. Even if a tire is slightly low, it’s a blowout risk. You’re also getting worse gas mileage on low pressure.
  3. Advertisement
Section 4 of 5:

Resetting a Tire Pressure Light

PDF download Download Article
  1. After you’ve fixed the underlying problem, the TPMS sensors may need some time to take some fresh readings and realize that there are no tire pressure issues. Hop on the highway when traffic is low and drive 50 miles per hour (80 km/h) for at least 10 minutes. The TPMS light should go away on its own.
  2. If your Ford model has a dedicated TPMS reset button, just use that. Turn the key to the “on” position but don’t crank the ignition. Then, press and hold the TPMS light button until the light on the dashboard blinks three times. Release the button and start the vehicle. The light should go off.
    • The TPMS button is more common in older Ford models (pre 2016 or so). It’s usually located near the steering wheel on the dashboard. Don’t forget to look underneath the steering wheel, too!
  3. Option #3—Disconnect the battery and reconnect it. If you can’t get the light to reset manually, reset your vehicle’s entire system by taking the negative battery terminal off. With the vehicle off and cold, pop the hood and use a wrench to disconnect the negative terminal. Wait 15 minutes and reconnect the battery. The light should go away the next time you start the car.[7]
    • You can speed the waiting time up by leaning on the horn or leaving the interior lights on for a minute or so. This will discharge the battery faster.
    • If the light still comes back on, see a mechanic. Either another sensor battery has died or there’s something wrong with your vehicle’s ICM or ECM. In any case, you can’t fix the problem without a mechanic.
  4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Tips

  • You can also try resetting the tire pressure sensors by deflating all of your tires and reinflating them to the recommended pressure. That’s a lot more time-consuming than the other options, though.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

Advertisement

You Might Also Like

Blinking Tire Pressure LightFlashing vs. Solid TPMS Light: What It Means & What to Do
Svc Tire Monitor Fix a Service (SVC) Tire Monitor Warning Light
Where Is the Tire Pressure Sensor Located Find and Replace Your Tire Pressure Sensors
Tire Losing Pressure but No LeakAir Pressure Draining from Your Tires? Here’s What It Means and How to Fix It
Car Light MeaningsA Guide to the Dashboard Warning Lights on Your Vehicle
Drive with Low Tire PressureIs It Safe to Drive with Low Tire Pressure? It Depends
Overinflated TiresOverinflated Tires: Why It Matters (and How to Handle It)
Reset Traction Control Light Reset a Traction Control Light (TCS)
Check Air Pressure in TiresCheck Air Pressure in Tires
Check Gauges LightWhat Does the Check Gauges Light Mean?
Tesla Tire PressureEverything You Need to Know About Tesla Tire Pressure
What Does the Wrench Light MeanWhat the Wrench Warning Light Means
Fix Abs LightWhy Is My ABS Light On? (And How Do I Fix It?)
Fill Air in a Car's Tires Fill Air in a Car's Tires
Advertisement

About This Article

Ed Beery
Co-authored by:
Automotive Specialist
This article was co-authored by Ed Beery and by wikiHow staff writer, Eric McClure. Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified. This article has been viewed 15,519 times.
10 votes - 70%
Co-authors: 3
Updated: March 31, 2024
Views: 15,519
Categories: Tires and Suspension
Thanks to all authors for creating a page that has been read 15,519 times.

Did this article help you?

Advertisement