Q&A for How to Operate a Scissor Lift

At minimum, a "Warning, Mobile plant operating in area" sign should be the minimum. Ideally, pedestrian exclusion areas or permanent floor markings should be used, but are not always possible. If available, a spotter should be used where there are hazardous obstructions at ground or overhead level - e.g. power lines, manhole grates, etc.

You usually can by detaching the control console from the scissor lift frame - though this is usually only done when performing high risk maneuvers where standing in the lift would be too dangerous - e.g. when driving the scissor lift on steel ramps to be transported by truck or trailer. When this is done the upmost care must be taken to stand as far away as possible from the scissor lift as the controls will allow. Move the controls slowly, smoothly, and carefully. Utilizing the aid of a spotter is also ideal if possible.

The charging connection location can vary by machine, but you will typically find it on the base near the battery. For specific instructions, consult the equipment's manual, a knowledgeable supervisor, or an authorized technician.

You should exit slowly down the ladder from the same entry point, using the steps and holding onto the guard rails of the machine. Do not jump off, as this can easily lead to sprains or strains.