This article was co-authored by Himesh Patel and by wikiHow staff writer, Amy Bobinger, BA. Himesh Patel is a Metallurgical Engineer at Mcclelland Laboratories in Reno, Nevada. With over five years of industry and graduate research experience in the raw materials industry, Himesh has extensive knowledge of mining and mineral extraction and recovery methods, mine financing, and the environmental impacts of mining. He received his MS in Metallurgical Engineering from the University of Nevada, Reno, and a Dual Degree in Mineral Engineering from the Indian Institute of Technology (Indian School of Mines), Dhanbad. Himesh is passionate about educating the public about the minerals industry.
There are 10 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 14,375 times.
Hydrogen water, or water that’s had hydrogen gas dissolved in it, is quickly gaining popularity as the latest health drink. The effects are still being studied, but early evidence suggests hydrogen water could be an effective anti-oxidant and anti-inflammatory. We’re breaking down what researchers know so far about hydrogen water, plus sharing tips on how you can make hydrogen water at home.
4 Methods for Making Hydrogen Water
- Purchase a hydrogen water bottle that will infuse your water with hydrogen bubbles.
- Drop a hydrogen tablet into a bottle of water and seal it tightly.
- Place a magnesium rod into a sealed bottle of water for several minutes.
- Infuse water using a sealed test tube containing malic acid and a magnesium rod.
Steps
4 Easy Ways to Make Hydrogen Water at Home
-
Use a commercial hydrogen water bottle. Open the lid of your hydrogen water bottle and pour bottled or filtered water up to the fill line. Screw on the lid and turn on the water bottle, allowing it to run based on the manufacturer’s instructions. When it’s finished, unscrew the top and drink the water.[1]
- You’ll be able to see hydrogen bubbles entering the water as the machine works.
- Hydrogen water bottles charge the water using two electrodes in a process known as electrolysis. One electrode creates oxygen—the byproducts of this are vented out of the machine. The other creates hydrogen, which is released into the water.
- You can also buy hydrogen water pitchers or countertop hydrogen water generators—these are larger, more expensive machines that can produce more hydrogen water at a time, but they use the same basic electrolysis process.
-
Dissolve a hydrogen-generating tablet in a water bottle. To use molecular hydrogen water tablets, drop the tablet into a container that you can seal tightly. Fill the container all the way to the top with cold water, then seal the lid tightly. Follow the packaging instructions for how long to allow the product to dissolve—usually around 5 minutes.[2]
- If you use cold water, the tablet will take longer to dissolve, but you’ll get a better concentration of hydrogen in the water.
- Tablets are a good way to get a consistent concentration of hydrogen in your water.
Advertisement -
Combine malic acid with a magnesium stick to boost H2 production. Place a magnesium stick into a test tube with about 1/4 tsp (1 gram) of food-grade malic acid powder. Fill the test tube almost to the top with filtered water. Use a needle to create a hole in the center of a cork and use the cork to seal the test tube. Drop the entire test tube into a glass water bottle, fill the bottle to the top with filtered water, and put the bottle in the freezer for about 30 minutes. After 30 minutes, remove the water bottle and gently shake it for about 2 minutes. Then, unscrew the bottle and drink the water. [3]
- Wear gloves and protective eyewear when handling the malic acid—it can be irritating to your skin or eyes if you make contact with it.[4]
- Pressure will develop in the bottle as the reaction creates hydrogen gas, so be careful when opening the container.
- If the cork pops off the test tube, the water is still okay to drink—malic acid is safe to consume and is commonly used as a preservative.
-
Use magnesium rods to create an H2 reaction. Place a metallic magnesium rod into an airtight glass or stainless steel bottle. Fill the bottle to the top with filtered water, seal the bottle tightly, and let it sit for 15–20 minutes.[5]
- This probably doesn’t create a very high concentration of hydrogen—expect around 1 ppm of hydrogen to water.
- Because hydrogen molecules are very tiny, the hydrogen can easily escape from porous materials. To get the best results, use a sturdy, non-permeable container, like a double-walled stainless steel bottle.
Expert Q&A
Video
Tips
Warnings
- Although you can find instructions online for creating your own electrolysis machine to make H2 gas, there’s not a safe and reliable way to compress that gas and dissolve it into drinking water.Thanks
References
- ↑ https://youtu.be/J-3T3IWgZoo?t=247
- ↑ https://patents.google.com/patent/WO2018011634A1/en
- ↑ https://youtu.be/0csiiPNvRdw?t=10
- ↑ https://efsa.onlinelibrary.wiley.com/doi/abs/10.2903/j.efsa.2014.3563
- ↑ https://youtu.be/BQgnokcvHcw?t=81
- ↑ https://patents.google.com/patent/WO2018011634A1/en
- ↑ https://pmc.ncbi.nlm.nih.gov/articles/PMC10816294/
- ↑ https://pmc.ncbi.nlm.nih.gov/articles/PMC5147523/
- ↑ https://www.fda.gov/inspections-compliance-enforcement-and-criminal-investigations/warning-letters/h2-beverages-inc-622917-06142022