How to Change a Tail Light Bulb on Nissan Versa Hatchback

Reviewed by Jason Shackelford

Last Updated: June 13, 2022

Need to change the Taillight bulb on a 2006-2013 Nissan Versa Hatchback? We can help. In this article, we'll walk your through the whole process from start to finish. Keep reading for our complete guide!

1

Open the rear hatchback door.

Download Article

The covers have a small slit opening in them.

2

Insert a flat head screwdriver into both covers.

Download Article

Behind each cover, you will see a small 10MM or 8MM nut attached to the taillight assembly stud.^{[1]
X
Research source}

3

Remove the lower nut first.

Download Article

^{[2]
X
Research source}

4

Remove the upper nut next.

Download Article

^{[3]
X
Research source}

5

Insert a flat head screwdriver between the taillight and vehicle's body.

Download Article

Slowly pry very slightly under the Taillight until it starts to move away from the body. Start at the bottom then the middle of the Taillight.^{[4]
X
Research source}

6

Fully remove the Taillight.

Download Article

If it doesn't move, gently pry very slightly a few more times until it does.

7

Change the bulb.

Download Article

Turn it counter clockwise until it releases from the Taillight. With the socket in your hand, carefully grab the bulb and pull it out of the socket and insert a new one.^{[5]
X
Research source}

8

Return the socket to the light assembly.

Download Article

Turn the socket clock wise until it clicks into the Taillight assembly and does not spin anymore.

9

Return the Taillight to the car.

Download Article

Then, push the Taillight assembly back into the car, making sure it sits flush with the body of the vehicle.

10

Replace the nuts.

Download Article

Then, snap them back into place both interior covers.^{[6]
X
Research source}

11

Check that the bulb now operates as need be.

Download Article

Video

Community Q&A

Search

Add New Question

Question

How can I remove trunk panels from a 2009 Nissan Versa?

Jorge camacho jr

Community Answer

You will need to see where the screws are, remove them, and then take the panel off carefully.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2
Question

What tools do I need?

Jorge camacho jr

Community Answer

A voltage meter and some minor tools: both a Philips and regular screwdriver, normal pliers, a basic set of sockets, and wrenches.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 1

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

When removing the bolts from the Taillight studs, it may be best to use your hand to spin them off the stud once they are almost fully loose, instead of using the ratchet or wrench, due to tight clearance.

Thanks
Helpful 0 Not Helpful 2

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Be careful when handling light bulbs. Do not squeeze or force a light bulb from a socket, as injury may occur due to broken glass.

Thanks
Helpful 3 Not Helpful 3
Do not pry hard between the Taillight and vehicle body, as damage to the Taillight could occur.

Thanks
Helpful 0 Not Helpful 0