How to Bend Aluminum Pipe

Co-authored by Surekha Krishnan

Last Updated: February 19, 2025 References

Aluminum pipe is much easier to bend than aluminum tubing, due to the greater wall thickness, since it is less likely to collapse or deform when you bend it. The thicker material will also require more muscle or the use of a power bender.^{[1]
X
Expert Source

Surekha Krishnan
Metallurgy Expert

Expert Interview}

Steps

Download Article

You can bend 1 1/4" aluminum conduit by hand, but a manual pipe bender will make it easier. It doesn't matter what you use to bend the pipe, the main thing is how you keep it from collapsing.^{[2]
X
Research source}
^{[3]
X
Research source}

Advertisement
Bend the pipe slowly so that you can watch to make sure it bends evenly and doesn't collapse or deform, and watch for cracks that may occur if the pipe is bent too sharply.^{[4]
X
Research source}
The pipe will not collapse, but remember that there is a radius to wall thickness / diameter formula that must be observed.^{[5]
X
Expert Source

Surekha Krishnan
Metallurgy Expert

Expert Interview} A loose rule of thumb is a maximum 3 1/2" radius to 1" diameter ratio.
Consider building dies to bend your pipe if you have the equipment, you can machine your own bending dies for bending the pipe, or you can rent a manual or hydraulic bender for this purpose.^{[6]
X
Research source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

When you use an electricians conduit bender, the head of the bender supports the pipe and helps to prevent distortion while bending.^{[7]
X
Research source}

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Check the back set or distance from the beginning of the radius to the centerline of the bend to make sure the finished pipe is the right length.

Thanks
Helpful 5 Not Helpful 4
Aluminum pipe may crack if you are using an alloy that doesn't have sufficient give for that purpose.^{[8]
X
Research source}

Thanks
Helpful 0 Not Helpful 0